Tradesmen Intl. in East Syracuse NY is looking for Ironworkers and Welders. Job opportunities available for ironworkers with connector experience and  NY State licensed welders.
(Posted 05-11-11) Click for contact information

John Pulsifer Construction in New London MN is looking for Pre-Engineered Steel Building Erectors, Welders, Concrete Workers and an Experienced Foreman. Other positions are also available.
(Posted 05-05-11) Click for contact information

Robinson Construction in Chippewa Falls WI is looking for Industrial Craft Workers. Positions for welders, ironworkers, millwrights, concrete finishers, carpenters and crane operator are available.
(Posted 05-02-11) Click for contact information

Midlands Mechanical in Hastings NE is looking for Welders and Pipe Fitters. Established contractor hiring pipe welders, pipefitters and plumbers. Projects in Grand Island, Hastings and Kearney areas.
(Posted 04-19-11) Click for contact information

S & B Metal Products in Daytona Beach FL is looking for Welders. Immediate job opening available for an experienced welder. S & B is a long established metal fabrication company.
(Posted 04-10-11) Click for contact information

Murray Costello Construction invites you to bid the Anthropologie @ Breton Village project at 1830 Breton Rd Southeast, Phase II Pad Site in Grand Rapids MI 49506. Scheduled to begin 07-18-11
(Posted 04-07-11) Click for contact information

Gateway Building Systems in Fargo ND is looking for Welders, Millwrights and Laborers. Job openings for welders, millwrights and laborers with steel building construction exp. Travel required.
(Posted 04-05-11) Click for contact information

Industrial Piping/Fabrication in Pocatello ID is looking for Pipefitters. Experienced pipe fitters needed for an industrial project. Working 6 ten's per week. Wages DOE. Drug test required.
(Posted 04-04-11) Click for contact information

Linear Controls in Lafayette LA is looking for Welders. Immediate openings for MIG welders with carbon steel metal fabrication. Must know all welding techniques & able to read drawings/prints.
(Posted 03-23-11) Click for contact information

Ashland Marine & Industrial in Harvey LA is looking for Carpenters, Welders and Fitters. Immediate openings for carpenters, pipefitters, pipe welders and structural fitters/welders.
(Posted 03-17-11) Click for contact information

Reynolds Incorporated in Smiths Station AL is looking for Carpenters and Pipe Layers. Water treatment plant experience desired. $15.00 to $20.00 per hour, DOE. Benefits package.
(Posted 03-14-11) Click for contact information

Precision Stainless in Owensboro KY is looking for Fitters and Welders. Currently hiring fitters and welders ,  Tig and stick .  Must know how to walk the cup and fusion welding .065 Stainless steel.
(Posted 03-12-11) Click for contact information

B & S Piping in Greensboro GA is looking for a Supervisor. Seeking personnnel with good character for supervisor position.  Must have experience in steam systems, components and piping.
(Posted 03-11-11) Click for contact information

Humphrey & Associates in Fort Worth TX is looking for Pipe Fitters. Now hiring pipefitters of all experience levels. A valid DL and HS/GED or Journey level required. Great benefit package. DFWP.
(Posted 03-03-11) Click for contact information

GA West & Company in Chunchula AL is looking for Carpenters, Millwrights, Pipe Fitters/Welders and Ironworkers with rigging experience. Shutdown in Brewton AL.
(Posted 03-01-11) Click for contact information

OCE Mechanical in Tulsa OK is looking for Pipe Fitters and Plumbers. Job openings available for experienced pipefitters and licensed journey level plumbers. Top wages with benefits. DFWP.
(Posted 02-28-11) Click for contact information

Trumbo Incorporated in Counce TN is looking for Pipe Welders and Fitters. Shutdown openings for certified pipe welders and fitters. Per-diem and mileage. Sundays pay double time. DFWP.
(Posted 02-24-11) Click for contact information

Humphrey & Associates in Fort Worth TX is looking for Pipe Fitters. Pipefitters in all experience levels are needed. Valid DL and HS/GED required. Drug screen (hair analysis) required.
(Posted 02-14-11) Click for contact information

Gateway Building Systems in Elbow Lake MN is looking for Concrete Masons and Welder/Millwrights. Prior exp. needed. Immediate openings. Wages, DOE. Must pass drug screening.
(Posted 02-14-11) Click for contact information

Miller-Leaman in Daytona Beach FL is looking for Welders. Need welder-fabricator with brake, roll, shear, plasma cutter and stainless TIG experience and a welder with stainless TIG/MIG experience.
(Posted 02-14-11) Click for contact information

Southern Machine & Steel in Fort Myers FL is looking for Welders. Immediate openings for welders with fabrication and erection experience. Structural steel projects. Prefer class A CDL. DFWP.
(Posted 02-10-11) Click for contact information

Herzog Railroad Services in Saint Joseph MO is looking for Welders. Hiring experienced flux-core welders for shift work, days or nights. HS grad/GED required.
(Posted 02-08-11) Click for contact information

Southeast Mechanical in Hollywood FL is looking for Pipefitters and Welders. Long term positions available for experienced 6G certified welders and experienced pipe fitters. Top pay and benefits.
(Posted 02-04-11) Click for contact information

Ellis Aluminum and Screen in Key West FL is looking for Aluminum Welder-Fabricators and Installers for Screen Rooms/Enclosures. Must have experience and a valid DL.
(Posted 02-01-11) Click for contact information

C A Jones in Newport News VA is looking for Welders. Now hiring structural welders. Must have quality skills with MIG, stick and flux core on carbon steel plate. Full time with OT available. Per-diem.
(Posted 01-26-11) Click for contact information

Miller's Custom Metals in Lake Worth FL is looking for a Welder/Fabricator. MIG, TIG and railing fabrication experience a must. Miller's is a high end custom shop.
(Posted 01-23-11) Click for contact information

Ashland Marine/Industrial in Harvey LA is looking for Industrial Craftworkers. Need carpenters, pipefitters, pipe welders and structural welder/fitters. Experience required.
(Posted 01-20-11) Click for contact information

New Century Fabricators in New Iberia LA is looking for Offshore Personel. Immediate work available for pipefitters, TIG welders and paint/blast foremen. Minimum 5 years offshore exp. required.
(Posted 01-18-11) Click for contact information

Strobel Construction Unlimited in Central City NE is looking for Pipe Welders. Openings for experienced pipe welders and skilled dual shield welders. Local CC project. Mandatory welding test.
(Posted 01-16-11) Click for contact information

Azteca Tank & Fabrication in Monahans TX is looking for Welders. Job openings for experienced single hand welders. Wage scale from $22.00 to $28.00 per hour, DOE.
(Posted 01-16-11) Click for contact information

Southern Mechanical in Jackson MS is looking for an Experienced Pipe Welder/Fitter.  Applicant also needs experience with steam and hydronic piping. Wage and benefits, DOE.
(Posted 01-16-11) Click for contact information

Robinson Construction in Perryville MO is looking for Ironworkers, Pipe Fitters, Pipe Welders and Millwrights. Also need a Pipefitter who is journey level licensed by the city of St. Louis.
(Posted 01-14-11) Click for contact information

OCE Mechanical in Tulsa OK is looking for Pipefitters and Plumbers. Now hiring licensed plumbers and pipe fitters. Top wage and benefit package. Must pass drug screen.
(Posted 01-11-11) Click for contact information

Gencor Industries in Orlando FL is looking for Fitter/Fabricators. Industrial manufacturing experience required. Must be able to read, interpret and fabracate from drawings & prints. Welding test. DFWP.
(Posted 01-11-11) Click for contact information

PVE Inc in Louisville KY is looking for Welders. TIG welders with stainless steel experience are needed. PVE is an ASME certified/code shop. The PVE shop is located in Sellersburg IN.
(Posted 01-10-11) Click for contact information

Snyder Mechanical in Elko NV is hiring Pipefitter/Welders, Plumbers and Sheetmetal Mechanics. 5 years experience required. NMSHA certification or willing to become certified. 10 hour OSHA is a plus.
(Posted 01-10-11) Click for contact information

Superior Fire Protection in Jupiter FL is looking for a Foreman. Responsible for sales, service and NFPA25 inspection standards. Great pay and benefits. Verifiable references required.
(Posted 01-09-11) Click for contact information

Russell Mechanical Company in Rancho Cordova CA is looking for Welder/Fitters. Experience with pipe, stainless steel and carbon steel stick welding needed.
(Posted 01-09-11) Click for contact information

OCS Industries in Brooklyn NY is looking for Welders. A minimum of 2 years experience is required. Must be able to braise using hand torch and stick. Professionals only need apply.
(Posted 01-08-11) Click for contact information

Joe's Welding Service in Midland TX is looking for a Welder. Need an experienced single hand welder who's reliable, honest and talented.
(Posted 01-06-11) Click for contact information

Gator Dock & Marine in Sanford FL is looking for Welders. Need an experienced mig/tig welder-fabricator with alumium  experience. Must read & interpret prints/drawings. Welding test required.
(Posted 01-05-11) Click for contact information

OCE Mechanical in Tulsa OK is looking for Plumbers and Pipefitters. Now hiring experienced pipe fitters and licensed plumbers. Excellent wage and benefit package. Drug screening mandatory.
(Posted 01-05-11) Click for contact information

Continental Steel Erectors in Hallsville MO is hiring Construction Labor. Start at $10 per hour. More if experienced with pre-engineered buildings. Travel is required. DFWP.
(Posted 12-30-10) Click for contact information

GA Castro Construction in Homestead FL is looking for Welders, Pipefitter/Sprinkler Installers and Commercial Carpenters with door experience. Industrial rehab Dixie Hwy/821 extension.
(Posted 12-29-10) Click for contact information

Linear Controls in Lafayette LA is looking for a TIG Welder. Must be exp. with fabricating stainless steel and aluminum sheet metal. Must be proficient in all welding techniques and read prints.
(Posted 12-27-10) Click for contact information

United Prison Equipment in Green Lane PA is looking for Welders. Position requires qualified experience and extensive travel throughout the Mid West, Southeast and Northeast.
(Posted 12-23-10) Click for contact information

Fricke Management & Contracting in Murphysboro IL is looking for Welders, Ironworkers, Concrete Workers and Construction Laborers. Experience required. Local industrial project. DFWP.
(Posted 12-14-10) Click for contact information

Cumings Marine Service in Memphis TN is looking for Structural Fitters. A minimum of 5 years experience is required. Competitive wage and benefits. Must read prints, pass physical & drug test.
(Posted 12-13-10) Click for contact information

Midlands Contracting in Kearney NE is looking for Form Setters, Pipe Layers and Laborers. Projects in NE and KS. $11.00 and up per hour. 50+ hour weeks. Lodging and per-diem. Drug test required.
(Posted 11-01-10) Click for contact information

Midwest Mechanical in Fargo ND is looking for a Pipe Fitter and an Estimator. Pipefitter requires a minimum of 5 years experience. Estimator should possess plumbing and heating knowledge. Full time.
(Posted 10-28-10) Click for contact information

River City Erectors in Biloxi MS is looking for Ironworkers. Must have a minimum of 3 years experience with current certified welding papers & OSHA 10 hour. Project duration 2 to 3 months.
(Posted 10-21-10) Click for contact information

B & I Contractors in Fort Myers FL is looking for Pipe Fitters and Welders. Jacksonville FL area project. Need commercial HVAC experience. Background check and drug test required.
(Posted 10-05-10) Click for contact information

A D Leddy & Son Inc in Providence RI is looking for a Pipe Insulator. Commercial and industrial experience preferred. Full time with benefits. RI & CT projects.
(Posted 10-05-10) Click for contact information

JR Johnstone Company is looking for Carpenters, Drywall/Ceiling Mechanics, Pipe Fitters-Welders/Sprinkler Mechanics and Painters. Hotel remodels. Projects in TN, AL, MS, GA and FL.
(Posted 10-03-10) Click for contact information

Rorers Construction in Fargo ND is looking for Carpenters and Metal Building Erectors. Carpenters need framing experience. Prefer experienced erectors with welding certifications. Local projects.
(Posted 09-27-10) Click for contact information

Gateway Building Systems in Elbow Lake MN is looking for Welder-Millwrights and Concrete Labor. Must have experience. Pay depends on experience. Must pass drug screen.
(Posted 09-12-10) Click for contact information

Prospect Steel in Little Rock AR is looking for Ironworkers, Welders and Millwrights. Blytheville AR plant shutdown. 2 years exp. and all hand tools required. $17.00 per hour & per-diem of $3.50 per hour.
(Posted 09-07-10) Click for contact information
Hurricane Season 2011 and we're building this seasons Hurricane Worker Database.
We're looking for craft and trade workers who are willing to travel into areas damaged by the 2011 seasons hurricanes and tropical storms. This program is in its ninth year and supplies information to over 380 Partnered FEMA Hurricane Contractors who are directly involved in the rebuilding and restoration process.
Click for more information on FEMA/Hurricane Construction Jobs.

Pre Made Resizeable Contractor Grade Blow-Out Plugs
Contractor grade blow-out plugs with a face of super tough composite that can't be damaged by over sanding. Easily resized with a simple score, snap and peel.

There is an immediate need for the following personnel for Flood Restoration Jobs
Dump trucks/5 to 7 yards. Front end loaders of all sizes. Tree personnel. Flood Clean-Up Jobs for Experienced Labor. Flood Restoration Jobs for Mold remediation and odor remediation personnel with capable ozone generation equipment. Flood Restoration for Carpenters. Roofers. Plumbers. Electricians. Drywall framers/hangers/tapers. HVAC Mechanics. Painters, Flooring installers. Masons/cement-brick-block-stucco. Welders/single hand-rig. Pipe Fitters. Millwrights.
Information on Flood Restoration Jobs in Tennessee and Kentucky

Interested in Gulf Coast Oil Spill Clean Up Jobs
All oil spill clean up jobs require company provided OSHA HAZWOPER training. Wages start at $13.41 per hour. Need people who are willing to travel to various locations around the Gulf Coast to assist or work hands-on with general oil spill clean up and ecological restoration of the areas affected. EPA Certified Haz-Mat technicians. Welders and others who are capable of setting up and taking down temporary structural steel frames out of 20+ foot stock. Dump truck owners with loader.
Information on Gulf Oil Spill Clean-Up Jobs

Can't bid on FEMA contracts for Hurricane Construction Jobs or Flood Restoration Jobs?
A main requirment is a DUNS number. Without a DUNS number you will not be allowed to bid on any Federal and FEMA contracts. It's also a good idea to visit http://www.ccr.gov and register.

It's Hurricane Season 2010 and we're building this seasons Hurricane Jobs Database.
We're looking for craft and trade workers who are willing to travel into areas damaged by the 2010 seasons hurricanes. This program is in its eighth year and supplies information to over 350 Partnered FEMA Hurricane Contractors who are directly involved in the rebuilding process.
Click for more information on FEMA/Hurricane Construction Jobs.

Interested in Hurricane Reconstruction or Flood Reconstruction Work?
Here's something you need to understand up front about disaster work. A hurricane or flood tears up everything. including that place you thought you could stay. You'll make more money with fewer problems if you can provide your own housing, meals and drinking water for at least two weeks with an RV, Camper or depending on cercomstances a tent. Motels will not available due to the local needs in the areas damaged by a hurricane. 
Information on Hurricane Reconstruction Jobs

According to the US Department of Labor:
Job opportunities for welders is expected to grow slower than average over the 2004-14 period. However, job openingss should be excellent as employers report difficulty finding enough qualified welders.  In 2004, the national average hourly wage for welders was $14.72. The middle 50% earned between $11.90 and $18.05. The lowest 10% had earnings of less than $9.79, while the top 10% earned over $22.20. 

Interested in Hurricane Reconstruction or Flood Reconstruction Work?
There's something you need to understand up front. A hurricane or flood tears up everything. You'll make more money  if you can provide your own housing, meals and drinking water for the first week with an RV, Camper or Tent. Motels may not be available due to local needs of the areas damaged by a flood or hurricane.  Click for information on finding Hurricane Reconstruction Jobs.

It's Hurricane Season 2009 and we're building this years Hurricane Database.
We're looking for construction workers who are willing to travel into areas damaged by the 2009 seasons hurricanes and tropical storms. This program is in its seventh year and supplies information to over 350 Partnered FEMA Hurricane Contractors.
Click for more information on FEMA/Hurricane Construction Jobs.

It's Hurricane Season 2008 and we're building this years Hurricane Database.
Over the past 6 years DryWallFlorida has worked with more than 250 Partnered Hurricane Contractors helping them to find the people they need for reconstruction projects, clean up & basic infrastructure repair after a hurricane. If a hurricane makes landfall, the following will be needed, ready to travel on very short notice. Leads & PM's, Carpenters, Electricians, Roofers, Plumbers, Drywall/Paint, Pipe Fitters, Operators, Tri Axles, Hoes/Loaders, Rig Welder/Single Hands, Bucket Booms, Flat Beds, Tree Climbers/Loggers and Laborers. 
Send your skills & info to our Partnered Hurricane Contractors.

Take a few minutes to visit some of our friends websites.
Robison Steel - AAA Superior Welding

hardy   lmarksville la.
joe at 318-523-9991
rig welder 28 yr.api asme tig stick wire feed all tools fab any pipeing of any type travel any where atleast 60 hrs or more power plant refinery pipeline cogen oilfield  drill rig i have done it all can push up to 20 man crew all trades
Contractors License   Yes
Workmans Comp   Liability   Yes
S.E.T. Welding & Fabrication   Fort Gibson OK
Steve E. Thouvenel at 918-478-2942
For your on site welding & fabricating needs. From repairs to existing structures to new ground up construction.  Located just minutes from Tulsa, OKand surrounding areas.  With hourly & bid rates. MIG, TIG & stick . Fabrication & repair to: oil drilling equipment, tugboats,conveyer systems, mixing bins, platforms, process piping , stairs & handrails, structural steel & more. Oklahoma State Steam Card. Certified Welding Inspector. Certified Welding Educator. MSHA Certified
Contractors License   Yes
Workmans Comp   Liability   Yes
clays mobile welding   franklin NC
jason clay at 828-369-7292
rig welder with all the tools to do stick,mig.tig,15 years exp in pipe,structurel,custom iron work,rock quarry,concrete plants. very dependable looking for work in NC,SC,TN,GA,VA
Contractors License   No
Workmans Comp   Liability   Yes
R&T Specialties Inc.   Cloverdale,  CA
Robert Viera at (707)894-4394
R&T Specialties is an indutrial plumbing and welding and fabrication company, with portable & in-shop fabrication capabilities. We work with copper, stainless steel, steel, plastic.  Our welding equipment includes ORBITAL welding,TIG,MIG we are certified in pipe and plate.  We have experience in dairy, wine making, hospitals, sewage treament plants, cheese mfg.  Our company specializes stainless steel.  Licensed and have all appropriate insurances
Contractors License   Yes
Workmans Comp   Liability   Yes
J A WELDING   CORPUS CHRISTI TX
JAIME AVILA at 361-728-3350
ALL WELDING NEEDS, STICK ,TIG, PIPE AND STRUCTURAL, FAB.OIL RIG , PIPE LINE, PETROCHEMICAL.  TRAVEL ANY WHERE YES CALL 361 728 3350
Contractors License   No
Workmans Comp   Liability   No
Alloy Specialty Welding   Fort Collins, Colorado
Tracy at 801-851-0461
Experienced Rig Welder. 18+ years experience. Certified in alloys as well as carbon, both Pipe & Structural. I also have a crew of Specialty Welders available for bigger jobs.
Contractors License   Yes
Workmans Comp   Liability   Yes
pipefitter welder   gainesville georgia
frank zang at 770-533-6845
pipefitter with 29 years exp,looking for work in georgia willing to travel inside of georgia. exp in piping boilers chillers cooling towers pumps heat exchangers air handeling units ect, all types of pipe carbon and stainless vic,copper,ect.
Contractors License   No
Workmans Comp   Liability   No
Juan Hernandez & Sons   Channel View, Texas
Juan at 832-541-5921
Experienced welder, rod welding, pipefitting, operator. General construction, drywall, fencebuilding, metal building fabricator.  Looking for company to advance with and i am willing to travel and make your company a great "hand
Contractors License   No
Workmans Comp   Liability   No
Pruitt"s Welding LLC   greenbrier arkansas
wes pruitt at 501-581-2087
18 yrs in food plants owend company for 4 yrs mostly piping mechenical rooms boilers chillers set eqitment conveyors have lots of rigs and electrc weldrs all tools trailers and man power to get the job done safe and on time set up gas rig and maintanic for saxton and seeco drill rigs have own ins on llc and trucks will travel
Contractors License   No
Workmans Comp   Liability   Yes
C-Tex Welding & Fabrication   Clarksville, TX
T.C. Bramlett at 903-741-5719
Experieced RIG welder/PipeFitter (all tools for both with full size Rig). All alloys, stainless, carbon, chromes, inconel, monel, hascaloy. Mig, Tig, FCAW, SMAW. I have built everything and am also a certified Boilermaker and railroad repairman! Willing to travel within TX, OK, LA, AR.
Contractors License   Yes
Workmans Comp   Liability   No
Matt LeBlanc's welding   Morgan City ,LA.
Matthew LeBlanc at 985-384-8575
Experienced rigwelder, All oilfield and related fields, New construction & Refurbishment. I own my own truck with all the tools for the job. Certified 6G. & 6GR. stick & flux-core. I am currently constructing Land-Based drilling rig substructures,and doing rig-ups,WILLING TO TRAVEL. I have experienced RIGWELDERS working with me that are also willing to travel.
Contractors License   No
Workmans Comp   Liability   Yes
Performance Weld/Fab   Martinsburg WV
Jim Calvert at 304 676 6304
Rig welder in DC Area in need of work currently doing structural work quarries and mines would like to get into heavy industrial or commercial construction Most tools on truck can smaw, gtaw, spool gun gun or wire feed.  Currently have AWS Unlimited Cert. To the D1.1 Code
Contractors License   Yes
Workmans Comp   Liability   Yes
Tettleton's Rig Welding   weatherford tx
Wes at 817 597-6564
Rig welder with 11 years experience in structural, oilfield, heavy equipment. Three years as ironworker.
Looking for work in Texas,will travel if pay is right.
Contractors License   Exempt
Workmans Comp   Liability   Yes
EDS WELDING   ST. PETE FL
ED at 727-527-8983
IRONWOKER AND WELDER FOR 25 YEARS I HAVE BUILT BIG AND SMALL PROJECTS  IAM A FOREMAN FOR FIRST CALL STEEL AND HAVE BEEN FOREMAN ON MANY BRIDGE JOBS
Contractors License   Yes
Workmans Comp   Liability   Yes
Cobb Welding  Holt, FL
Dustin Cobb at 850-305-6998
Over 13+ yrs experience in welding; pipe, boiler tubes, stainless, carbon, aluminum, chromolloy.
Contractors License   Yes
Workmans Comp   Liability   No
J&A's Welding   Edmond, OK.
John Crawford at 405-821-6174
6G Certified Welder  15yr. welding  exp. have my own rig welding truck w/stainless covered New pro 300 Miller Welder looking for subcontract opportunities. structural steel & pipefitter  welder  chill water heating & gas pipe 21/2-12" OD w/mechanical exp. & Boiler rooms. WILL TRAVEL
Contractors License   Yes
Workmans Comp   Liability   Yes
3aw welding & fabrication   clewiston FL
gary/ray at 863-983-2251
we are a complete s.b.e certified fabrication located in clewiston Florida we offer new fabrication as well as repair and custom metal work.with over 20 yrs experience in this area we understand the need for quality and cost effective repairs & fabrication. we use only a.w.s certified welders,from aluminum ,stainless,or carbon steel we can handle all your metal working needs
Contractors License   Yes
Workman's Comp   Liability   Yes
Welfab2   Burleson TX
Clayton at 817-915-9783
Certified plate/pipe welding 6-G  ,fitting, layout.30 yrs. experience. Rig or shop welding available. Call for answers to any additional questions and current rates.
Contractors License   Yes
Workman's Comp   Liability   Yes
J-WELD   Eastanollee GA
Certified welder, 8+ years experience. Recently gone on my own, have welding rig.
Pro Arc Inc   New Port Richey FL
30 years heavy equipment repairs, fabricating, structural, mig, tig, stick. Portable rig
Edward Burke Services   Lake Wales FL
I am a self employed welder/fabricator with 21 years in the field. fully rigged service
HERNANDEZ WELDING   NORWALK CA
RIG WELDER w/15+ years of exp. on pipe welding/ fitting on gas, water-low & high
Matthews Welding   Sanford NC
We are a welding company that specializes in welding, steel erection, fabrication, and
Ralley Welding   Lawrence KS
I am out of Lawrence, Ks.  Main strucural steel but not limited to that.  Been involved in
Suraton Welding   Loxahatchee Florida
6g cert. in stainless 316[6g aluminium 5086 [3] 6g cooper nickel [4] 6g steel.
Miller Mechanical Repair   Fort Myers, FL
Services Available: Shop Service Repair, Field Service Repair, Preventative
Hillbilly'z Welding   Marshall, Arkansas
I a have Linclon pipeline welder, Bobcat 250 & full welding rig.
J.C WELDING CO.  Denton, Texas
8 yrs experience in shop fabrication with Stick, MiG and Tig welding, w/mechanical
JEMI Weld/Fabrication   Picayune, MS
On site welding/fabricating. 15 years exp. Able to weld all types of metal. Plate and
Piatt & Sons Welding   Deatsville AL
We are a family owned and operated Steel Fabrication and Welding Shop. We have rigs
Because many of our Partnered Contractors deal with FEMA/Other Federal Agencies we follow OFCCP guidelines on data storage, privacy and security.
TCI is a DUNS/CCR registered contractor.  Have questions or comments? Contact us
Tradesmen - Craft Workers - Subs: Click here to get your own listing our Builders Board - Carpenters - Drywallers - Painters - Plumbers - Roofers - Electricians - Masons
HVAC Techs - Rig Welders/Pipefitters - Heavy Equipment Operators - Ironworkers

Welding Jobs - Pipefitter Jobs-Rig Welder Jobs - Pipe Fitter Jobs - Pipe Welder Jobs
Certified Welder Jobs - Combo Welder Jobs - Plate Welder Jobs - Single Hand Welder Jobs
Find Welder Jobs and Pipe Fitter Jobs Online
Posting a construction job offer on this site for 30 days is fast, easy and 100% free. Post your job offer today.
Look for Welder/Pipefitter Jobs

RFS, LLC in Minot ND is looking for Pipe Fitters. Opening for journeyman fire sprinkler fitter. Must have experience with installing sprinkler piping, valves and accessories in commercial and industrial environments.
(Posted 01-05-12) Click for contact information

SKIHI Enterprises Ltd in Sherman TX is looking for Welders, Pipe Fitters & Plumbers. Now hiring welder/pipefitters, licensed plumbers & helpers/apprentices. Experience required. Drug test/physical required.
(Posted 11-13-11) Click for contact information

Action Fire Sprinklers in Delray Beach FL is hiring Sprinkler Fitters. Hiring experienced fire sprinkler fitters & helpers. Must be reliable and able to work flexible hours. Transportation required. DFWP.
(Posted 09-27-11) Click for contact information

Jones-McIntosh in Sumter SC is looking for Pipe Fitters and Welders. Accepting applications for pipefitters and pipe welders. Must be certified, no exceptions. Sumter & Camden area projects.
(Posted 09-16-11) Click for contact information

Energy Services in Casper WY is looking for a Welder. Need an exp. fabrication welder. Wages, DOE. Will run company's welding truck for projects in the Casper WY area.
(Posted 09-08-11) Click for contact information

J R's Welding & Fabrication in Plant City FL is looking for Welders and Fitters. Established structural steel and tank shop needs welders, fitters and ironworkers for structural steel field work.
(Posted 08-30-11) Click for contact information

Precision Welding/Fabrication in Westbrook ME is looking for Stair and Railing Fabricators. Need stainless steel experience. Will fabricate beams, columns and other parts off detailed shop drawings in shop.
(Posted 08-25-11) Click for contact information

Mechanical Contractor in Richmond VA is looking for Pipe Fitters. Experienced pipefitters needed for shutdown in Richmond area. Large project with tight schedule. Tools and DL a must.
(Posted 08-24-11) Click for contact information

Handrail Design in Knoxville TN is looking for Welder-Fabricators. Travel required. Stainless steel handrail manufacturer needs installer for work in the Southeast and Mid-Atlantic. Must be proficient in TIG.
(Posted 08-16-11) Click for contact information

Sunbelt Welding and Fabrication in Largo FL is looking for Welders. 5 years experience required. Must know TIG and MIG with aluminum and steel. Must have DL and be dependable.
(Posted 08-11-11) Click for contact information

B and I Contractors in Saint Petersburg FL is looking for Pipefitters and Welders. Minimum 5 years experience, tools and transportation required. Passing background check and drug screen mandatory.
(Posted 07-07-11) Click for contact information

Asphalt Plant Supply in Malta NY is looking for Ironworker/Welders. Need 3 people to work on 6-8 week job. We pay for room, travel and good hourly wage. Must be able to travel.
(Posted 06-20-11) Click for contact information

B & S Piping in Greensboro GA is looking for Industrial Pipe Insulators. Nationwide projects, some international. Good starting salary & benefits. Based in north central Georgia. 
(Posted 06-03-11) Click for contact information

Tradesmen Intl. in East Syracuse NY is looking for Pipe Fitters. Job opportunities available for experienced pipefitters. All skill levels from apprentice to lead-journeyman will be considered.
(Posted 06-03-11) Click for contact information

Masci Construction in Port Orange FL is looking for Pipe Layers. Local contractor seeks an experienced pipe layer. A minimum of 10 years experience is required. Saint Augustine area project.
(Posted 05-16-11) Click for contact information
The Only Contractor Grade Drywall Plug Available
Used by facility managers nationwide to maintain the required 1 hour fire rating on walls and ceilings.